产品中心
新闻动态 当前位置:首页>新闻动态>新闻动态

卫生间防水工艺流程

网址:fangshuim.aou1.cn  2021-08-24  作者:admin    阅读:

卫生间防水工艺流程
Waterproof process flow of toilet
基层处理、清理 做找平层 结合层 细部附加层 丙烯酸防水层 蓄水试验 保护层施工 二次蓄水试验。
Base course treatment, cleaning, leveling layer, binding layer, detail additional layer, acrylic waterproof layer, water storage test, protective layer construction, secondary water storage test.
1. 应对厨房、卫生间的标高复核正确,特别注意地漏的标高位置正确。 2. 对地漏、管道根部墙洞质量要仔细检查,墙洞要密实合格,找平层施工时管道根部必须按要求作嵌缝处理。河北立体车库 消防报警器塑料配件 电缆接地箱 电缆保护接地箱 塑料土工格栅 消弧线圈装置
1. The elevation of kitchen and toilet shall be rechecked correctly, and special attention shall be paid to the correct elevation position of floor drain. 2. The quality of floor drain and wall hole at the root of pipeline shall be carefully checked. The wall hole shall be dense and qualified. During the construction of leveling layer, the root of pipeline must be caulked as required.
3. 阴阳角应作成圆弧形,并顺直、平光。 4. 找平层施工:基面有空隙、裂缝、不平等缺陷的,用水泥砂浆修补抹平。使基面必须坚固、平整、干净,无灰尘、油腻、蜡、脱模剂等以及其他碎屑物质。
3. The internal and external corners shall be made into arc shape, straight and smooth. 4. Construction of leveling layer: if there are gaps, cracks and inequality defects on the base surface, repair and trowel with cement mortar. The base surface must be firm, flat and clean without dust, grease, wax, release agent and other debris.

返回新闻

网站出租电话
13313028229